Vai al contenuto

Installing Zabbix DB Server

This chapter focuses on the installation of the Zabbix database. While Zabbix supports various SQL databases, we will concentrate on three primary options: PostgreSQL, MariaDB, and MySQL. It's worth noting that Oracle is also supported, but its support is deprecated. Zabbix 7 will be the final version supporting Oracle as a backend.

We will outline the installation and configuration process for each database on a separate machine. However, it's important to understand that there's no strict requirement to install the database on a separate server from your Zabbix server. The choice between local and remote database installation depends on your specific needs and infrastructure.

For most initial setups, a locally installed database will likely suffice. When opting for local installation, follow these best practices:

  • Ensure the database is stored on separate disks from the operating system.
  • Monitor performance as your system grows.
  • Be prepared to migrate the database to a separate server if performance issues arise.
Note

Local connections are typically faster than connections over TCP. Therefore, moving the database to its own server isn't always the optimal solution. The best configuration depends on your specific requirements and system architecture.

When deciding between local and remote database installation, consider the following factors:

  1. System Resources: Evaluate whether your Zabbix server has sufficient resources to handle both the application and database workload.
  2. Network Latency: Assess the impact of network latency on database queries if opting for a remote installation.
  3. Scalability: Consider future growth and the potential need for dedicated database hardware.
  4. Backup and Maintenance: Determine if separate database installation simplifies your backup and maintenance procedures.

In the following sections, we'll dive into the installation and configuration processes for PostgreSQL, MariaDB, and MySQL. Each section will provide step-by-step instructions to ensure a smooth setup, regardless of whether you choose local or remote installation.


Installing Zabbix with MariaDB

To begin the installation process for the MariaDB server, the first step involves manually creating a repository configuration file. This file, mariadb.repo, must be placed in the /etc/yum.repos.d/ directory. The repository file will allow your package manager to locate and install the necessary MariaDB components.

To create the MariaDB repository file, execute the following command in your terminal:


Add the MariaDB repository

# sudo nano /etc/yum.repos.d/mariadb.repo

This will open a text editor where you can input the repository configuration details. Once the repository is configured, you can proceed with the installation of MariaDB using your package manager.

# vi /etc/yum.repos.d/mariadb.repo

The above command will open a new file, allowing you to define the repository configuration. After the file is created, you'll need to add the following content to configure the MariaDB repository. Ensure that the version specified, in this case, 10.11, is supported by Zabbix by reviewing the latest version requirements for your specific Zabbix deployment.

Here’s the configuration you need to add:

# MariaDB 10.11 RedHatEnterpriseLinux repository list - created 2023-11-01 14:20 UTC
# https://mariadb.org/download/
[mariadb]
name = MariaDB
# rpm.mariadb.org is a dynamic mirror if your preferred mirror goes offline. See https://mariadb.org/mirrorbits/ for details.
# baseurl = https://rpm.mariadb.org/10.11/rhel/$releasever/$basearch
baseurl = https://mirror.23m.com/mariadb/yum/10.11/rhel/$releasever/$basearch
# gpgkey = https://rpm.mariadb.org/RPM-GPG-KEY-MariaDB
gpgkey = https://mirror.23m.com/mariadb/yum/RPM-GPG-KEY-MariaDB
gpgcheck = 1

After saving the file, ensure that everything is properly set up and that your MariaDB version is compatible with your Zabbix version to avoid potential integration issues.

Before proceeding with the MariaDB installation, it’s a best practice to ensure your operating system is up-to-date with the latest patches and security fixes. This will help maintain system stability and compatibility with the software you're about to install.

To update your OS, run the following command:

# dnf update -y

This command will automatically fetch and install the latest updates available for your system, applying security patches, performance improvements, and bug fixes. Once the update process is complete, you can move forward with the MariaDB installation.

Install the MariaDB database

With the operating system updated and the MariaDB repository configured, you are now ready to install the MariaDB server and client packages. This will provide the necessary components to run and manage your database.

To install the MariaDB server and client, execute the following command:

# dnf install MariaDB-server MariaDB-client

This command will download and install both the server and client packages, enabling you to set up, configure, and interact with your MariaDB database. Once the installation is complete, you can proceed to start and configure the MariaDB service.

Now that MariaDB is installed, we need to enable the service to start automatically upon boot and start it immediately. Use the following command to accomplish this:

# systemctl enable mariadb --now

This command will both enable and start the MariaDB service. Once the service is running, you can verify that the installation was successful by checking the version of MariaDB using the following command:

# mysql -V

The expected output should resemble this:

mysql  Ver 15.1 Distrib 10.11.6-MariaDB, for Linux (x86_64) using EditLine wrapper

To ensure that the MariaDB service is running properly, you can check its status with the following command:

# systemctl status mariadb

You should see an output similar to this, indicating that the MariaDB service is active and running:

● mariadb.service - MariaDB 10.11.6 database server
     Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; preset: disabled)
    Drop-In: /etc/systemd/system/mariadb.service.d
             └─migrated-from-my.cnf-settings.conf
     Active: active (running) since Sat 2023-11-18 19:19:36 CET; 2min 13s ago
       Docs: man:mariadbd(8)
             https://mariadb.com/kb/en/library/systemd/
    Process: 41986 ExecStartPre=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=0/SUCCESS)
    Process: 41987 ExecStartPre=/bin/sh -c [ ! -e /usr/bin/galera_recovery ] && VAR= ||   VAR=`cd /usr/bin/..; /usr/bin/galera_recovery`; [ $? -eq 0 ]   && systemctl set-environment _WSREP_START>
    Process: 42006 ExecStartPost=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=0/SUCCESS)
   Main PID: 41995 (mariadbd)
     Status: "Taking your SQL requests now..."
      Tasks: 9 (limit: 12344)
     Memory: 206.8M
        CPU: 187ms

This confirms that your MariaDB server is up and running, ready for further configuration.


Securing the MariaDB database

To enhance the security of your MariaDB server, it's essential to remove unnecessary test databases, anonymous users, and set a root password. This can be done using the mariadb-secure-installation script, which provides a step-by-step guide to securing your database.

Run the following command:

# mariadb-secure-installation

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we'll need the current
password for the root user. If you've just installed MariaDB, and
haven't set the root password yet, you should just press enter here.

Enter current password for root (enter for none):
OK, successfully used password, moving on...

Setting the root password or using the unix_socket ensures that nobody
can log into the MariaDB root user without the proper authorisation.

You already have your root account protected, so you can safely answer 'n'.

Switch to unix_socket authentication [Y/n] n
 ... skipping.

You already have your root account protected, so you can safely answer 'n'.

Change the root password? [Y/n] y
New password:
Re-enter new password:
Password updated successfully!
Reloading privilege tables..
 ... Success!


By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] y
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] y
 ... Success!

By default, MariaDB comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] y
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!

The mariadb-secure-installation script will guide you through several key steps:

  1. Set a root password if one isn't already set.
  2. Remove anonymous users.
  3. Disallow remote root logins.
  4. Remove the test database.
  5. Reload the privilege tables to ensure the changes take effect.

Once complete, your MariaDB instance will be significantly more secure.


Create the Zabbix database

With MariaDB now set up and secured, we can move on to creating the database for Zabbix. This database will store all the necessary data related to your Zabbix server, including configuration information and monitoring data.

Follow these steps to create the Zabbix database:

  • Log in to the MariaDB shell as the root user:

You'll be prompted to enter the root password that you set during the mariadb-secure-installation process.

# mysql -uroot -p
  • Create the Zabbix database:

Once you're logged into the MariaDB shell, run the following command to create a database for Zabbix:

MariaDB [(none)]> CREATE DATABASE zabbix CHARACTER SET utf8mb4 COLLATE utf8mb4_bin;

This command creates a new database named zabbix with the UTF-8 character set, which is required for Zabbix.

  • Create a dedicated user for Zabbix and grant the necessary privileges: Next, you need to create a user that Zabbix will use to access the database. Replace password with a strong password of your choice.
MariaDB [(none)]> CREATE USER 'zabbix-web'@'<zabbix server ip>' IDENTIFIED BY '<password>';
MariaDB [(none)]> CREATE USER 'zabbix-srv'@'<zabbix server ip>' IDENTIFIED BY '<password>';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON zabbix.* TO 'zabbix-srv'@'<zabbix server ip>';
MariaDB [(none)]> GRANT SELECT, UPDATE, DELETE, INSERT ON zabbix.* TO 'zabbix-web'@'<zabbix server ip>';
MariaDB [(none)]> FLUSH PRIVILEGES;

This creates new users for zabbix-web and zabbix-srv, grants them access to the zabbix database, and ensures that the privileges are applied immediately.

  • In some cases, especially when setting up Zabbix with MariaDB, you might encounter issues related to stored functions and triggers if binary logging is enabled.

To address this, you need to set the log_bin_trust_function_creators option to 1 in the MariaDB configuration file. This allows non-root users to create stored functions and triggers without requiring SUPER privileges, which are restricted when binary logging is enabled.

MariaDB [(none)]> SET GLOBAL log_bin_trust_function_creators = 1;
MariaDB [(none)]> QUIT

At this point, your Zabbix database is ready, and you can proceed with configuring the Zabbix server to connect to the database.

Warning

In the Zabbix documentation, it is explicitly stated that deterministic triggers need to be created during the schema import. On MySQL and MariaDB systems, this requires setting GLOBAL log_bin_trust_function_creators = 1 if binary logging is enabled, and you lack superuser privileges.

If the log_bin_trust_function_creators option is not set in the MySQL configuration file, it will block the creation of these triggers during schema import. This is essential because, without superuser access, non-root users cannot create triggers or stored functions unless this setting is applied.

To summarize:

  • Binary logging enabled: If binary logging is enabled and the user does not have superuser privileges, the creation of necessary Zabbix triggers will fail unless log_bin_trust_function_creators = 1 is set.
  • Solution: Add log_bin_trust_function_creators = 1 to the [mysqld] section in your MySQL/MariaDB configuration file or temporarily set it at runtime with SET GLOBAL log_bin_trust_function_creators = 1 if you have sufficient permissions.

This ensures that Zabbix can successfully create the required triggers during schema import without encountering privilege-related errors.


Add the Zabbix repository and populate the DB

# rpm -Uvh https://repo.zabbix.com/zabbix/6.5/rocky/9/x86_64/zabbix-release-6.5-2.el9.noarch.rpm
# dnf clean all
# dnf install zabbix-sql-scripts

Upload the data from zabbix (db structure, images, user, ... )

# zcat /usr/share/zabbix-sql-scripts/mysql/server.sql.gz | mysql --default-character-set=utf8mb4 -uroot -p zabbix
Warning

Depending on the speed of your hardware or virtual machine, the process may take anywhere from a few seconds to several minutes. Please be patient and avoid canceling the operation; just wait for the prompt to appear.

Log back into your MariaDB Database as root

# mysql -uroot -p

Once the import of the Zabbix schema is complete and you no longer need the log_bin_trust_function_creators global parameter, it is a good practice to remove it for security reasons.

To revert the change and set the global parameter back to 0, use the following command in the MariaDB shell:

MariaDB [(none)]> SET GLOBAL log_bin_trust_function_creators = 0;
Query OK, 0 rows affected (0.001 sec)

This command will disable the setting, ensuring that the server's security posture remains robust.


Configure the firewall

Configuring Firewall Rules for MariaDB Access To complete our database setup, we need to configure the firewall to allow incoming connections for the MariaDB database from our Zabbix server. Currently, no connections are accepted. Let's examine the current firewall configuration:

# firewall-cmd --list-all
public (active)
  target: default
  icmp-block-inversion: no
  interfaces: enp0s3 enp0s8
  sources:
  services: cockpit dhcpv6-client  ssh
  ports:
  protocols:
  forward: yes
  masquerade: no
  forward-ports:
  source-ports:
  icmp-blocks:
  rich rules:

To securely allow MariaDB access, we'll create a dedicated zone and open port 3306/tcp only for the Zabbix server's IP address:

  • Create a new firewall zone for MariaDB:
# firewall-cmd --new-zone=mariadb-access --permanent
success
  • Reload the firewall to apply changes:
# firewall-cmd --reload
success
  • Verify the new zone has been added:
# firewall-cmd --get-zones
block dmz drop external home internal mariadb-access nm-shared public trusted work
  • Add the Zabbix server's IP to the new zone:
# firewall-cmd --zone=mariadb-access --add-source=<zabbix-serverip> --permanent
  • Open port 3306/tcp in the new zone:
success
# firewall-cmd --zone=mariadb-access --add-port=3306/tcp  --permanent
  • Reload the firewall again to apply the latest changes:
success
# firewall-cmd --reload

To verify the new firewall rules, inspect the mariadb-access zone:

# firewall-cmd --zone=mariadb-access --list-all

mariadb-access (active)
  target: default
  icmp-block-inversion: no
  interfaces:
  sources: <ip from zabbix-server>
  services:
  ports: 3306/tcp
  protocols:
  forward: no
  masquerade: no
  forward-ports:
  source-ports:
  icmp-blocks:
  rich rules:

With these configurations in place, the database server is now ready to accept connections from the Zabbix server. You can proceed with the next task: Installing the Zabbix Server


Installing Zabbix with MySQL

Before proceeding with the MySQL server installation, it's crucial to set up the appropriate MySQL repository. This ensures that we install the correct version compatible with our Zabbix implementation.

  • Verify Supported MySQL Versions Prior to installation, consult the official Zabbix documentation to confirm the supported MySQL versions. This step is critical for several reasons:

  • Compatibility: Ensures that the MySQL version works seamlessly with your Zabbix installation.

  • Support: Avoids installing versions that are no longer supported or maintained.
  • Performance: Guarantees optimal performance and utilization of features specific to Zabbix requirements.

  • Create MySQL Repository To install the proper MySQL server files, you need to add the official MySQL repository to your system. This process typically involves the following steps: a. Download the MySQL repository configuration file. b. Add the repository to your system's package manager. c. Update the package manager's cache to recognize the new repository. The exact commands for these steps may vary depending on your operating system and the specific MySQL version required for your Zabbix installation.

  • Prepare for Installation Once the repository is set up and you've confirmed the appropriate MySQL version, you'll be ready to proceed with the actual installation of the MySQL server.

By following these preliminary steps, you ensure a smooth installation process and avoid potential compatibility issues down the line. The next section will cover the actual installation procedure for the MySQL server.

documentation to see what version is supported so you don't install a version that is not supported or is not supported anymore.


Add the MySQL repo

Run the following command to install the MySQL repo for version 8.0

# dnf -y install https://dev.mysql.com/get/mysql80-community-release-el9-1.noarch.rpm

Note

"If you install this on RedHat 8 and higher or alternatives like CentOS, Rocky or Alma 8 then you need to disable the OS provided MySQL module by running 'module disable mysql'."

Let's update our OS first with the latest patches

# dnf update -y

This command will automatically fetch and install the latest updates available for your system, applying security patches, performance improvements, and bug fixes. Once the update process is complete, you can move forward with the MariaDB installation.


Installing the MySQL database

With the operating system updated and the MySQL repository configured, you are now ready to install the MySQL server and client packages. This will provide the necessary components to run and manage your database.

To install the MySQL server, execute the following command:

# dnf -y install mysql-community-server

Now that MySQL is installed, we need to enable the service to start automatically upon boot and start it immediately. Use the following command to accomplish this:

# systemctl enable mysqld --now

Once the installation is complete, you can verify the version of the MySQL server by using the following command:

# mysql -V

The output should look like this:

mysql Ver 8.0.35 for Linux on x86_64 (MySQL Community Server - GPL)

To ensure that the MySQL service is running properly, you can check its status with the following command:

# systemctl status mysqld

● mysqld.service - MySQL Server
     Loaded: loaded (/usr/lib/systemd/system/mysqld.service; enabled; preset: disabled)
     Active: active (running) since Mon 2023-11-20 22:15:51 CET; 1min 15s ago
       Docs: man:mysqld(8)
             http://dev.mysql.com/doc/refman/en/using-systemd.html
    Process: 44947 ExecStartPre=/usr/bin/mysqld_pre_systemd (code=exited, status=0/SUCCESS)
   Main PID: 45012 (mysqld)
     Status: "Server is operational"
      Tasks: 37 (limit: 12344)
     Memory: 448.3M
        CPU: 4.073s
     CGroup: /system.slice/mysqld.service
             └─45012 /usr/sbin/mysqld

Nov 20 22:15:43 mysql-db systemd[1]: Starting MySQL Server...
Nov 20 22:15:51 mysql-db systemd[1]: Started MySQL Server.

Securing the MySQL database

MySQL will secure our database with a random root password that is generated when we install the database. First thing we need to do is replace it with our own password. To find what the password is we need to read the log file with the following command:

# grep 'temporary password' /var/log/mysqld.log

Change the root password as soon as possible by logging in with the generated, temporary password and set a custom password for the superuser account:

# mysql -uroot -p
mysql> ALTER USER 'root'@'localhost' IDENTIFIED BY '<my mysql password>';
mysql> quit

To enhance the security of your MySQL server, it's essential to remove unnecessary test databases, anonymous users, and set a root password. This can be done using the mysql-secure-installation script, which provides a step-by-step guide to securing your database.

Note

"There is no need to reset the root password for MySQL again as we have reset it already. The next step is optional but recommended."

# mysql_secure_installation

Securing the MySQL server deployment.

Enter password for user root:
The 'validate_password' component is installed on the server.
The subsequent steps will run with the existing configuration
of the component.
Using existing password for root.

Estimated strength of the password: 100
Change the password for root ? ((Press y|Y for Yes, any other key for No) : n

 ... skipping.
By default, a MySQL installation has an anonymous user,
allowing anyone to log into MySQL without having to have
a user account created for them. This is intended only for
testing, and to make the installation go a bit smoother.
You should remove them before moving into a production
environment.

Remove anonymous users? (Press y|Y for Yes, any other key for No) : y
Success.


Normally, root should only be allowed to connect from
'localhost'. This ensures that someone cannot guess at
the root password from the network.

Disallow root login remotely? (Press y|Y for Yes, any other key for No) : y
Success.

By default, MySQL comes with a database named 'test' that
anyone can access. This is also intended only for testing,
and should be removed before moving into a production
environment.


Remove test database and access to it? (Press y|Y for Yes, any other key for No) : y
 - Dropping test database...
Success.

 - Removing privileges on test database...
Success.

Reloading the privilege tables will ensure that all changes
made so far will take effect immediately.

Reload privilege tables now? (Press y|Y for Yes, any other key for No) : y
Success.

All done!

The mysql-secure-installation script will guide you through several key steps:

  1. Set a root password if one isn't already set.
  2. Remove anonymous users.
  3. Disallow remote root logins.
  4. Remove the test database.
  5. Reload the privilege tables to ensure the changes take effect.

Once complete, your MySQL instance will be significantly more secure.


Create the Zabbix databases

With MySQL now set up and secured, we can move on to creating the database for Zabbix. This database will store all the necessary data related to your Zabbix server, including configuration information and monitoring data.

Follow these steps to create the Zabbix database:

  1. Log in to the MySQL shell as the root user:
# mysql -u root -p

You'll be prompted to enter the root password that you set during the mysql-secure-installation process.

Once you're logged into the MySQL shell, run the following command to create a database for Zabbix:

mysql> CREATE DATABASE zabbix CHARACTER SET utf8mb4 COLLATE utf8mb4_bin;

This command creates a new database named zabbix with the UTF-8 character set, which is required for Zabbix.

  • Create a dedicated user for Zabbix and grant the necessary privileges: Next, you need to create a user that Zabbix will use to access the database. Replace password with a strong password of your choice.
mysql> CREATE USER 'zabbix-web'@'<zabbix server ip>' IDENTIFIED BY '<password>';
mysql> CREATE USER 'zabbix-srv'@'<zabbix server ip>' IDENTIFIED BY '<password>';
mysql> GRANT ALL PRIVILEGES ON zabbix.* TO 'zabbix-srv'@'<zabbix server ip>';
mysql> GRANT SELECT, UPDATE, DELETE, INSERT ON zabbix.* TO 'zabbix-web'@'<zabbix server ip>';
mysql> FLUSH PRIVILEGES;

This creates new users for zabbix-web and zabbix-srv, grants them access to the zabbix database, and ensures that the privileges are applied immediately.

  • In some cases, especially when setting up Zabbix with MariaDB, you might encounter issues related to stored functions and triggers if binary logging is enabled.

To address this, you need to set the log_bin_trust_function_creators option to 1 in the MariaDB configuration file. This allows non-root users to create stored functions and triggers without requiring SUPER privileges, which are restricted when binary logging is enabled.

mysql> SET GLOBAL log_bin_trust_function_creators = 1;
mysql> QUIT

At this point, your Zabbix database is ready, and you can proceed with configuring the Zabbix server to connect to the database.

Warning

In the Zabbix documentation, it is explicitly stated that deterministic triggers need to be created during the schema import. On MySQL and MariaDB systems, this requires setting GLOBAL log_bin_trust_function_creators = 1 if binary logging is enabled, and you lack superuser privileges.

If the log_bin_trust_function_creators option is not set in the MySQL configuration file, it will block the creation of these triggers during schema import. This is essential because, without superuser access, non-root users cannot create triggers or stored functions unless this setting is applied.

To summarize:

  • Binary logging enabled: If binary logging is enabled and the user does not have superuser privileges, the creation of necessary Zabbix triggers will fail unless log_bin_trust_function_creators = 1 is set.
  • Solution: Add log_bin_trust_function_creators = 1 to the [mysqld] section in your MySQL/MariaDB configuration file or temporarily set it at runtime with SET GLOBAL log_bin_trust_function_creators = 1 if you have sufficient permissions.

This ensures that Zabbix can successfully create the required triggers during schema import without encountering privilege-related errors.


Add the Zabbix repository and populate the MySQL DB

# rpm -Uvh https://repo.zabbix.com/zabbix/6.5/rocky/9/x86_64/zabbix-release-6.5-2.el9.noarch.rpm
# dnf clean all
# dnf install zabbix-sql-scripts

Now let;s upload the data from zabbix (db structure, images, user, ... )

# zcat /usr/share/zabbix-sql-scripts/mysql/server.sql.gz | mysql --default-character-set=utf8mb4 -uroot -p zabbix
Enter password:
Warning

Depending on the speed of your hardware or virtual machine, the process may take anywhere from a few seconds to several minutes. Please be patient and avoid canceling the operation; just wait for the prompt to appear.

Log back into your MySQL Database as root

# mysql -uroot -p

Once the import of the Zabbix schema is complete and you no longer need the log_bin_trust_function_creators global parameter, it is a good practice to remove it for security reasons.

To revert the change and set the global parameter back to 0, use the following command in the MariaDB shell:

mysql> SET GLOBAL log_bin_trust_function_creators = 0;
Query OK, 0 rows affected (0.001 sec)

This command will disable the setting, ensuring that the server's security posture remains robust.


Configure the firewall

Configuring Firewall Rules for MySQL Access To complete our database setup, we need to configure the firewall to allow incoming connections for the MySQL database from our Zabbix server. Currently, no connections are accepted. Let's examine the current firewall configuration:

# firewall-cmd --list-all
public (active)
  target: default
  icmp-block-inversion: no
  interfaces: enp0s3 enp0s8
  sources:
  services: cockpit dhcpv6-client  ssh
  ports:
  protocols:
  forward: yes
  masquerade: no
  forward-ports:
  source-ports:
  icmp-blocks:
  rich rules:

To securely allow MySQL access, we'll create a dedicated zone and open port 3306/tcp only for the Zabbix server's IP address:

  • Create a new firewall zone for MariaDB:
# firewall-cmd --new-zone=mysql-access --permanent
success
  • Reload the firewall to apply changes:
# firewall-cmd --reload
success
  • Verify the new zone has been added:
# firewall-cmd --get-zones
block dmz drop external home internal mysql-access nm-shared public trusted work
  • Add the Zabbix server's IP to the new zone:
# firewall-cmd --zone=mysql-access --add-source=<zabbix-serverip> --permanent
  • Open port 3306/tcp in the new zone:
success
# firewall-cmd --zone=mysql-access --add-port=3306/tcp  --permanent
  • Reload the firewall again to apply the latest changes:
success
# firewall-cmd --reload

To verify the new firewall rules, inspect the mysql-access zone:

# firewall-cmd --list-all --zone=mysql-access
mysql-access (active)
  target: default
  icmp-block-inversion: no
  interfaces:
  sources: <ip from the zabbix-server>
  services:
  ports: 3306/tcp
  protocols:
  forward: no
  masquerade: no
  forward-ports:
  source-ports:
  icmp-blocks:
  rich rules:

With these configurations in place, the database server is now ready to accept connections from the Zabbix server. You can proceed with the next task: Installing the Zabbix Server


Installing Zabbix with PostgreSQL

For our DB setup with PostgreSQL we need to add our PostgreSQL repository first to the system. As of writing PostgreSQL 13-16 are supported but best is to have a look before you install it as new versions may be supported and older maybe unsupported both by Zabbix and PostgreSQL. Usually it's a good idea to go with the latest version that is supported by Zabbix. Zabbix also supports the extension TimescaleDB this is someting we will talk later about. As you will see the setup from PostgreSQL is very different from MySQL not only the installation but also securing the DB.

The table of compatibility can be found here.

Add the PostgreSQL repo

So let us start first setting up our PostgreSQL repository with the folowing commands.

# Install the repository RPM:
sudo dnf install -y https://download.postgresql.org/pub/repos/yum/reporpms/EL-9-x86_64/pgdg-redhat-repo-latest.noarch.rpm

# Disable the built-in PostgreSQL module:
sudo dnf -qy module disable postgresql

# Install PostgreSQL:
sudo dnf install -y postgresql16-server

# Initialize the database and enable automatic start:
sudo /usr/pgsql-16/bin/postgresql-16-setup initdb
sudo systemctl enable postgresql-16 --now

Securing the PostgreSQL database

As you've pointed out, PostgreSQL handles access permissions differently from MySQL and MariaDB. PostgreSQL relies on a file called pg_hba.conf to manage who can access the database, from where, and what encryption method is used for authentication.

Note

Client authentication in PostgreSQL is configured through the pg_hba.conf file, where "HBA" stands for Host-Based Authentication. This file specifies which users can access the database, from which hosts, and how they are authenticated. For further details, you can refer to the official PostgreSQL documentation."

Add the following lines, the order here is important.

# vi /var/lib/pgsql/16/data/pg_hba.conf
# "local" is for Unix domain socket connections only
local   zabbix          zabbix-srv                               scram-sha-256
local   all             all                                      peer
# IPv4 local connections:
host    zabbix          zabbix-srv      <ip from zabbix server/24> scram-sha-256
host    zabbix          zabbix-web      <ip from zabbix server/24> scram-sha-256
host    all             all             127.0.0.1/32             scram-sha-256

After we changed the pg_hba file don't forget to restart postgres else the settings will not be applied. But before we restart let us also edit the file postgresql.conf and allow our database to listen on our network interface for incomming connections from the zabbix server. Postgresql will standard only allow connections from the socket.

# vi /var/lib/pgsql/16/data/postgresql.conf

To configure PostgreSQL to listen on all network interfaces, you need to modify the postgresql.conf file. Locate the following line:

#listen_addresses = 'localhost'

Replace it with:

listen_addresses = '*'

This will enable PostgreSQL to accept connections from any network interface, not just the local machine. After making this change, restart the PostgreSQL service to apply the new settings:

# systemctl restart postgresql-16

If the service fails to restart, review the pg_hba.conf file for any syntax errors, as incorrect entries here may prevent PostgreSQL from starting.

Next, to prepare your PostgreSQL instance for Zabbix, you’ll need to create the necessary database tables. Begin by installing the Zabbix repository, as you did for the Zabbix server. Then, install the appropriate Zabbix package that contains the predefined tables, images, icons, and other database elements needed for the Zabbix application.


Add the Zabbix repository and populate the PgSQL DB

To begin, add the Zabbix repository to your system by running the following commands:

# dnf install https://repo.zabbix.com/zabbix/6.0/rhel/9/x86_64/zabbix-release-6.0-4.el9.noarch.rpm -y
# dnf install zabbix-sql-scripts -y

With the necessary packages installed, you are now ready to create the Zabbix users for both the server and frontend.

First, switch to the postgres user and create the Zabbix server database user:

# su - postgres
# createuser --pwprompt zabbix-srv
Enter password for new role: <server-password>
Enter it again: <server-password>

Next, create the Zabbix frontend user, which will be used to connect to the database:

# createuser --pwprompt zabbix-web
Enter password for new role: <frontend-password>
Enter it again: <frontend-password>

After creating the users, you need to prepare the database schema. As the root user, unzip the necessary schema files by running the following command:

# gzip -d /usr/share/zabbix-sql-scripts/postgresql/server.sql.gz

This will extract the database schema required for the Zabbix server.

Now that the users are created, the next step is to create the Zabbix database. First, switch to the postgres user and execute the following command to create the database with the owner set to zabbix-srv:

# su - postgres
# createdb -E Unicode -O zabbix-srv zabbix

Once the database is created, you should verify the connection and ensure that the correct user session is active. To do this, log into the zabbix database using the zabbix-srv user:

# psql -d zabbix -U zabbix-srv

After logging in, run the following SQL query to confirm that both the session_user and current_user are set to zabbix-srv:

zabbix=> SELECT session_user, current_user;
 session_user | current_user
--------------+--------------
 zabbix-srv   | zabbix-srv
(1 row)

If the output matches, you are successfully connected to the database with the correct user.

We are now ready to create our database zabbix. Become user postgres again and run next command to create the database as our user zabbix-srv:

# su - postgres
# createdb -E Unicode -O zabbix-srv  zabbix

Let's verify that we are really connected to the database with the correct session. Login from the Postgres shell on the zabbix database

# psql -d zabbix -U zabbix-srv

Make sure we are logged in with our correct user zabbix-srv.

zabbix=> SELECT session_user, current_user;
 session_user | current_user
--------------+--------------
 zabbix-srv   | zabbix-srv
(1 row)

PostgreSQL indeed differs significantly from MySQL or MariaDB in several aspects, and one of the key features that sets it apart is its use of schemas. Unlike MySQL, where databases are more standalone, PostgreSQL's schema system provides a structured, multi-user environment within a single database.

Schemas act as logical containers within a database, enabling multiple users or applications to access and manage data independently without conflicts. This feature is especially valuable in environments where several users or applications need to interact with the same database concurrently. Each user or application can have its own schema, preventing accidental interference with each other’s data.

Note

PostgreSQL comes with a default schema, typically called public, but it's generallya best practice to create custom schemas to better organize and separate database objects, especially in complex or multi-user environments.

For more in-depth information, I recommend checking out the detailed guide at this URI, which explains the benefits and use cases for schemas in PostgreSQL.

To finalize the database setup for Zabbix, we need to configure schema permissions for both the zabbix-srv and zabbix-web users.

First, we create a custom schema named zabbix_server and assign ownership to the zabbix-srv user:

zabbix=> CREATE SCHEMA zabbix_server AUTHORIZATION "zabbix-srv";
CREATE SCHEMA

Next, we set the search path to the zabbix_server schema so that it's the default for the current session:

zabbix=> SET search_path TO "zabbix_server";

To confirm the schema setup, you can list the existing schemas:

zabbix=> \dn
          List of schemas
     Name      |       Owner
---------------+-------------------
 public        | pg_database_owner
 zabbix_server | zabbix-srv
(2 rows)

At this point, the zabbix-srv user has full access to the schema, but the zabbix-web user still needs appropriate permissions to connect and interact with the database. First, we grant USAGE privileges on the schema to allow zabbix-web to connect:

zabbix=# GRANT USAGE ON SCHEMA zabbix_server TO "zabbix-web";
GRANT

However, zabbix-web still cannot perform any operations on the tables or sequences. To allow basic data interaction without giving too many privileges, grant the following permissions:

  • For tables: SELECT, INSERT, UPDATE, and DELETE.
  • For sequences: SELECT and UPDATE.
zabbix=# GRANT SELECT, INSERT, UPDATE, DELETE ON ALL TABLES IN SCHEMA zabbix_server TO "zabbix-web";
GRANT
zabbix=# GRANT SELECT, UPDATE ON ALL SEQUENCES IN SCHEMA zabbix_server TO "zabbix-web";
GRANT

Now, the zabbix-web user has appropriate access to interact with the schema while maintaining security by limiting permissions to essential operations.

With the users and permissions set up correctly, you can now populate the database with the Zabbix schema and other required elements. Follow these steps:

  1. Log in as the postgres user if you are not already:

bash # su - postgres

  1. Connect to the Zabbix database and run the SQL script to create the necessar y tables and insert initial data. Enter the psql shell for the zabbix database:

bash # psql -d zabbix -U zabbix-srv

  1. Execute the SQL file to populate the database. Run the following command in the psql shell:

sql zabbix=# \i /usr/share/zabbix-sql-scripts/postgresql/server.sql

Warning: Depending on your hardware or VM performance, this process can take anywhere from a few seconds to several minutes. Please be patient and avoid canceling the operation.

  1. Monitor the progress as the script runs. You will see output similar to:

plaintext CREATE TABLE CREATE INDEX ... ... INSERT 0 1 INSERT 0 1 INSERT 0 1 INSERT 0 1 COMMIT

Once the script completes and you return to the zabbix=# prompt, the database should be successfully populated with all the required tables, schemas, images, and other elements needed for Zabbix.

Note

If you encounter the following error during the SQL import: vbnet psql:/usr/share/zabbix-sql-scripts/postgresql/server.sql:7: ERROR: no schema has been selected to create in It indicates that the search_path setting might not have been correctly applied. This setting is crucial because it specifies the schema where the tables and other objects should be created. By correctly setting the search path, you ensure that the SQL script will create tables and other objects in the intended schema.

To ensure that the Zabbix tables were created successfully and have the correct permissions, you can verify the table list and their ownership using the psql command:

  • List the Tables: Use the following command to list all tables in the zabbix_server schema:

sql zabbix=# \dt

You should see a list of tables with their schema, name, type, and owner. For example:

Schema         | Name                       | Type  | Owner
----------------+----------------------------+-------+------------
zabbix_server  | acknowledges               | table | zabbix-srv
zabbix_server  | actions                    | table | zabbix-srv
zabbix_server  | alerts                     | table | zabbix-srv
zabbix_server  | auditlog                   | table | zabbix-srv
zabbix_server  | autoreg_host               | table | zabbix-srv
...
zabbix_server  | usrgrp                      | table | zabbix-srv
zabbix_server  | valuemap                    | table | zabbix-srv
zabbix_server  | valuemap_mapping            | table | zabbix-srv
zabbix_server  | widget                      | table | zabbix-srv
zabbix_server  | widget_field                | table | zabbix-srv
(173 rows)
  • Verify Permissions: Confirm that the zabbix-srv user owns the tables and has the necessary permissions. You can check permissions for specific tables using the \dp command:

sql zabbix=# \dp zabbix_server.*

This will display the access privileges for all tables in the zabbix_server schema. Ensure that zabbix-srv has the required privileges.

If everything looks correct, your tables are properly created and the zabbix-srv user has the appropriate ownership and permissions. If you need to adjust any permissions, you can do so using the GRANT commands as needed.

Note

If you prefer not to set the search path manually each time you log in as the zabbix-srv user, you can configure PostgreSQL to automatically use the desired search path. Run the following SQL command to set the default search path for the zabbix-srv role:

sql zabbix=> ALTER ROLE "zabbix-srv" SET search_path = "$user", public, zabbix_server;

This command ensures that every time the zabbix-srv user connects to the database, the search_path is automatically set to include $user, public, and zabbix_server.

If you are ready you can exit the database and return as user root.

zabbix=>  \q
# exit

Configure the firewall

To allow incoming connections to the PostgreSQL database from your Zabbix server, follow these steps to configure the firewall:

  1. Check Current Firewall Configuration: Verify the current settings to ensure the firewall is active and no PostgreSQL-related rules are present:

bash # firewall-cmd --list-all

  1. Create a New Zone for PostgreSQL: Define a new firewall zone specifically for PostgreSQL access:

bash # firewall-cmd --new-zone=postgresql-access --permanent success

  1. Reload Firewall Configuration: Apply the changes made to the firewall configuration:

bash # firewall-cmd --reload success

  1. Verify New Zones: Check that the new postgresql-access zone has been created:

bash # firewall-cmd --get-zones block dmz drop external home internal nm-shared postgresql-access public trusted work

  1. Allow Zabbix Server IP: Add the IP address of your Zabbix server to the new postgresql-access zone to permit incoming connections:

bash # firewall-cmd --zone=postgresql-access --add-source=<zabbix-serverip> --permanent success

  1. Open PostgreSQL Port: Open port 5432/tcp for the PostgreSQL service within the postgresql-access zone:

bash # firewall-cmd --zone=postgresql-access --add-port=5432/tcp --permanent success

  1. Reload Firewall Configuration Again: Apply the new rules to the firewall:

bash # firewall-cmd --reload

  1. Verify the Firewall Rules: Ensure that the new rules are correctly applied by listing the configurations for the postgresql-access zone:

bash # firewall-cmd --zone=postgresql-access --list-all

You should see output similar to:

bash postgresql-access (active) target: default icmp-block-inversion: no interfaces: sources: 192.168.56.18 services: ports: 5432/tcp protocols: forward: no masquerade: no forward-ports: source-ports: icmp-blocks: rich rules:

With these steps, the firewall will be configured to allow incoming connections to the PostgreSQL database from your Zabbix server on port 5432/tcp.

This concludes our chapter. You can continue with the next task Installing the Zabbix Server